4 Easy DIY Indoor Plant Hangers

Looking for ways to fit more plants into your home? Need ideas for keeping plants away from children and pets? Or, perhaps you simply want some beautiful, live decor to fill your space! Regardless, there are plenty of ways to create your own, simple plant hangers for your indoor plants. Here are 4 easy DIY indoor plant hangers that anyone can make!

4 Easy DIY Indoor Plant Hangers

Wooden dowels

A simple wooden dowel, sturdy tree limb, or plant hanging rod is another easy way to hang your plants. This method can be especially helpful if you have multiple plants you want to hang at once. You can fit a lot of hangers on one piece of wood! This option is perfect for hanging in front of a window and allowing all of those plants to bask in the sunlight!

A closet rod works well for this project, but any strong, wooden or even metal dowel will do. Using a few brackets, a drill, and some screws, you can have your new dowel hanging from the ceiling or wall in just a few minutes. S-hooks work well for attaching your plants.

Be sure to use a stud finder before drilling to give your rod plenty of support and avoid ripping out any drywall.

Wooden hooks

While it’s popular to hang plants from metal ceiling hooks, wooden wall hooks are another beautiful and super simple option.

1. To do this, simply cut out an L-shaped piece of wood. You can make it as large or small as you want, but somewhere around 6″ x 6″ works well for most plants.
2. After that, sand the edges and round the corners if you’d like.
3. Lastly, using two or more screws, drill it into the wall, creating a sideways “L”. Always use a stud finder to drill into the stud for the best support.
4. Now that your wooden hook is secure, just hang your plant over the top section of the “L”. If you want, you could also add a groove on the end to help hold your plant securely in place.

(If you’re not sure that you’re ready to make your own, this simple, 2-pack of wooden plant hangers from Amazon is another great option.)

Wooden Base Plant Hanger

Another super simple and inexpensive DIY option is a wooden base plant hanger. To make one, you’ll need:

• A wooden base, such as a tree trunk slice or a piece of sanded wood
• Some rope
• A drill
• A metal hook

Here’s how to make your plant hanger:

1. Start by taking your piece of wood and drilling 3-4 holes in equal increments around, about 1-2 inches from the edge.
2. Next, thread a long piece of rope through each hole and tie a large knot underneath to hold each strand in place.
3. Set your plant pot on your wooden base inside the ropes.
4. Lastly, tie the ropes together at the top and hang!

Macrame Plant Hangers

Macrame is a beautiful and easy way to add some personality to your home. It’s also a great way to show off your green thumb by displaying your favorite plants in style. If you’re looking for a fun and rewarding DIY project, this macrame plant hanger is the perfect option.

What You’ll Need

• 10 yards of 3/4 inch cotton rope
• Scissors
• A dowel or rod
• A wooden ring
• A tape measure

Instructions

1. Cut 10 pieces of rope that are each 6 feet long.
2. Tie the ends of two ropes together to form a loop.
3. Hang the loop over the dowel or rod.
4. Tie the ends of the remaining ropes to the loop, spacing them evenly.
5. Tie a square knot at the bottom of the loop to secure the ropes.
6. Cut the excess rope at the bottom of the knot.
7. Tie the wooden ring to the center of the macrame plant hanger.
8. Hang your plant in the macrame plant hanger!

Tips

• If you want to make a larger macrame plant hanger, you can use 12 or 14 feet of rope.
• You can also use different colors of rope to create a more colorful macrame plant hanger.
• If you’re not sure how to tie a square knot, there are plenty of tutorials available online.
• Once you’ve made your macrame plant hanger, you can use it to display any plant that you like.
• Be sure to water your plant regularly, and fertilize it as needed.
• Enjoy your beautiful new macrame plant hanger!

Check out these 16 Easy DIY Macrame Plant Hangers for Beginners to get some ideas!

Macrame Plant Hangers

Print

How to make a simple macrame plant hanger for your houseplants

Prep Time 10 minutes

Active Time 40 minutes

Total Time 50 minutes

Difficulty Medium

Materials

• 10 yards of 3/4 inch cotton rope
• Scissors
• A dowel or rod
• A wooden ring

Tools

• Tape measure

Instructions

1. Cut 10 pieces of rope that are each 6 feet long.
2. Tie the ends of two ropes together to form a loop.
3. Hang the loop over the dowel or rod.
4. Tie the ends of the remaining ropes to the loop, spacing them evenly.
5. Tie a square knot at the bottom of the loop to secure the ropes.
6. Cut the excess rope at the bottom of the knot.
7. Tie the wooden ring to the center of the macrame plant hanger.
8. Hang your plant in the macrame plant hanger!

Notes

• If you want to make a larger macrame plant hanger, you can use 12 or 14 feet of rope.
• You can also use different colors of rope to create a more colorful macrame plant hanger.
• If you're not sure how to tie a square knot, there are plenty of tutorials available online.
• Once you've made your macrame plant hanger, you can use it to display any plant that you like.